Kadett B Forum
Werkstatt => Fahrwerk => Thema gestartet von: Stefan Persson am 06. Januar 2020, 20:19:30
-
Hello
I have a question, can i buy 25mm anti roll bar in Germany?
I´m building att Kadett B for historic racing in Sweden.
-
Schönes Foto :tumb:
-
Here are my Kadett
-
Hi Stefan,
no, there is nothing on the market. Few years ago some guys talked about a reproduction but I do not know if they finished that project. Some years ago I have seen a racing Kadett with a second anti roll bar connected to the original one. Also saw another one using a modified Kadett C anti roll bar.
-
Hello Stefan - even we could not help you - where did you get these fender flares and if you use the little ohv engine - do you have a source for LSD Differentials ?
regards
alex
-
Hello Stefan,
Steinmetz (Reprotec) wanted to re-produce parts in 22mm and 25mm. Of both versions only very few were made. I have both of them. But it seems this project is discontinued.You have two options now:
1) change the fixing on the B-Kadett and use anything else available (my recommendation, as there is alot of stuff available for example Ford Escorts or some other brands) or
2) use two of the standard stabilizer bars. This would require some engineering.
If you have an OHV engine the 22mm is more than enough. Even the 25mm on my CIH is a bit too much on the Nordschleife.
-
Thank you for the answers
I will look further and see if I find a 25mm anti roll bar.
I use the crossflow motor and ZF gearbox
-
wow, that looks very nice. What rear brakes do you use? The calipers do not look familiar to me.
If you don't like your anymore, call me :wink:
Do you plan any racing or is it just for street use?
-
Seems that Lenk still offers a 22mm for the front and 19mm for the rear axle.
http://www.lenk-tuning.com/opelgtstart.htm
-
Stefan, nice front spoiler. What material did you use? Did youu made any mould? I am looking also for one for my racing Kadett.
-
Yes Lenk unfortunately has only 22mm. This are Admiral brake discs and Alcon caliper. the front spoiler is made of fiberglass, yes I have a mould for it.
it is a copy of the Steimetz front spoiler they ran with some races in 1971
-
Hallo Stefan,
super Technik, tolle Arbeit, ein sehr schöner Rennkadett.
Viele Grüße
Steffen