Kadett B Forum

Werkstatt => Fahrwerk => Thema gestartet von: Stefan Persson am 06. Januar 2020, 20:19:30

Titel: Anti roll bar
Beitrag von: Stefan Persson am 06. Januar 2020, 20:19:30

Hello
I have a question, can i buy 25mm anti roll bar in Germany?
I´m building att Kadett B for historic racing in Sweden.

Titel: Re: Anti roll bar
Beitrag von: Altopelandi am 06. Januar 2020, 22:15:16

Schönes Foto  :tumb:

Titel: Re: Anti roll bar
Beitrag von: Stefan Persson am 07. Januar 2020, 08:01:17

Here are my Kadett

Titel: Re: Anti roll bar
Beitrag von: cruiser am 07. Januar 2020, 09:48:43

Hi Stefan,

no, there is nothing on the market. Few years ago some guys talked about a reproduction but I do not know if they finished that project. Some years ago I have seen a racing Kadett with a second anti roll bar connected to the original one. Also saw another one using a modified Kadett C anti roll bar.

Titel: Re: Anti roll bar
Beitrag von: gintonic am 07. Januar 2020, 10:20:12

Hello Stefan - even we could not help you - where did you get these fender flares and if you use the little ohv engine - do you have a source for LSD Differentials ?

regards
alex

Titel: Re: Anti roll bar
Beitrag von: Kadettmarcel am 07. Januar 2020, 12:17:08

Hello Stefan,
Steinmetz (Reprotec) wanted to re-produce parts in 22mm and 25mm. Of both versions only very few were made. I have both of them. But it seems this project is discontinued.You have two options now:
1) change the fixing on the B-Kadett and use anything else available (my recommendation, as there is alot of stuff available for example Ford Escorts or some other brands) or
2) use two of the standard stabilizer bars. This would require some engineering.

If you have an OHV engine the 22mm is more than enough. Even the 25mm on my CIH is a bit too much on the Nordschleife.

Titel: Re: Anti roll bar
Beitrag von: Stefan Persson am 07. Januar 2020, 12:40:42

Thank you for the answers
I will look further and see if I find a 25mm anti roll bar.
I use the crossflow motor and ZF gearbox

Titel: Re: Anti roll bar
Beitrag von: Kadettmarcel am 07. Januar 2020, 13:56:18

wow, that looks very nice. What rear brakes do you use? The calipers do not look familiar to me.
If you don't like your anymore, call me  :wink:

Do you plan any racing or is it just for street use?

Titel: Re: Anti roll bar
Beitrag von: cruiser am 08. Januar 2020, 02:05:09

Seems that Lenk still offers a 22mm for the front and 19mm for the rear axle.

http://www.lenk-tuning.com/opelgtstart.htm

Titel: Re: Anti roll bar
Beitrag von: Kadettmarcel am 08. Januar 2020, 08:35:41

Stefan, nice front spoiler. What material did you use? Did youu made any mould? I am looking also for one for my racing Kadett.

Titel: Re: Anti roll bar
Beitrag von: Stefan Persson am 08. Januar 2020, 21:52:55

Yes Lenk unfortunately has only 22mm.  This are Admiral brake discs and Alcon caliper.  the front spoiler is made of fiberglass, yes I have a mould for it.
it is a copy of the Steimetz front spoiler they ran with some races in 1971

Titel: Re: Anti roll bar
Beitrag von: KB2000 am 09. Januar 2020, 09:12:13

Hallo Stefan,
super Technik, tolle Arbeit, ein sehr schöner Rennkadett.
Viele Grüße
Steffen